PERTHPOLISHED CONCRETE FLOORSPrepare the surface properly
Remove unsuitable surface material and establish the starting point for the next floor finish. Grinding scope depends on what is on the slab and what will go over it.
Start with your space
Concrete grinding is the first and most important stage of any polished concrete job — it's what levels the surface, removes old coatings or contamination, and exposes the aggregate to the depth your finish calls for. Get this stage wrong and every following step, from sealing to final polish, inherits the problem. We run it as a staged process with progressively finer diamond tooling, checking the surface at each pass rather than rushing to the final grit.
Grinding is also the stage we use to assess whether a floor is a good candidate for full polishing or better suited to resurfacing.
Concrete grinding is commonly used on garage floors to remove stains, oil residue, and uneven surfaces. It creates a smooth, level base ideal for sealing, coating, or polishing, giving homeowners a durable, professional-looking floor built to handle vehicle traffic.
Large industrial and warehouse floors benefit from grinding to eliminate high spots, old adhesives, and surface imperfections. This prepares the concrete for heavy machinery, forklifts, and constant foot traffic while improving safety and long-term durability.
Grinding driveways removes cracks, stains, and rough patches caused by weather and vehicle wear. It creates a smoother surface ideal for resurfacing or sealing, improving both the driveway's appearance and its resistance to future damage.
Grinding is essential for stripping away old paint, epoxy, tiles, or adhesive residue from concrete surfaces. This prepares floors for new coatings or finishes, ensuring proper adhesion and a clean, long-lasting result for renovation projects.
Uneven slabs caused by shifting soil or poor original pours can be corrected through grinding. This creates a flat, safe surface for flooring installation, reducing trip hazards and ensuring consistent results for tiling or coating applications.
Before achieving a glossy, polished concrete finish, grinding is used to smooth and refine the surface. This foundational step removes imperfections and opens the concrete's pores, allowing polishing compounds to bond effectively for a premium result.
Technicians inspect the concrete slab for cracks, unevenness, and existing coatings. This step determines the grinding approach, grit sequence, and equipment needed, ensuring the process addresses specific surface conditions before work begins on-site.
Heavy-duty diamond grinding tools remove old coatings, adhesives, and surface imperfections. This coarse pass levels the concrete, exposing the aggregate beneath and creating a uniform base ready for progressively finer grinding stages.
Multiple passes using progressively finer diamond grits smooth the surface further. Each stage refines the concrete's texture, gradually eliminating scratches and preparing the slab for the densification and polishing phases that follow.
A chemical densifier is applied to harden the surface, filling microscopic pores and strengthening the concrete. This step improves durability and creates a solid foundation that enhances the final polished sheen and longevity.
Progressively finer polishing pads buff the surface, gradually increasing gloss levels from matte to high-shine. Perth contractors tailor this stage to achieve the client's preferred finish, whether satin, semi-gloss, or mirror-like polish.
A protective sealant is applied to guard against stains, moisture, and wear. This final step locks in the polished shine while extending the concrete's lifespan, making it easier to maintain long-term.
Concrete grinding
Choosing the right concrete grinding contractor makes all the difference between a smooth, professional finish and a job that needs redoing. Our Perth team brings years of hands-on experience, using industry-grade diamond grinding equipment to deliver consistent, level results across residential and commercial projects.
Whether you're preparing a floor for polishing, sealing, or a complete resurface, our contractors get the groundwork right the first time, saving you money and hassle down the line.
What to expect
Concrete grinding is the foundation of any polishing project, removing surface imperfections, old coatings, and unevenness to prepare the slab for its final finish. Using diamond-tipped grinding equipment, we work through progressively finer grits to level the surface and expose the desired look, whether that's a smooth matte finish or a fully exposed aggregate. Grinding also addresses cracks, stains, and uneven patches before any sealing or polishing begins. It's a precise process that sets the stage for a lasting result. Call us for a free quote on concrete grinding services in Perth.
Used in early grinding stages, metal-bond diamonds cut through tough surfaces like old coatings, adhesives, and high spots. They're durable enough to handle aggressive material removal without wearing down quickly during coarse grinding passes.
Resin-bond pads are used in later grinding stages to refine the surface after metal-bond grinding. They produce smoother results and are essential for progressing toward polished or honed finishes with minimal visible scratching.
Coarse grits handle initial surface preparation, removing old coatings, unevenness, and surface imperfections. This stage establishes a level base and exposes the aggregate, setting the foundation for all subsequent grinding and polishing work.
Medium grits smooth out scratches left from coarse grinding, gradually refining the surface. This transitional stage bridges rough preparation and fine polishing, ensuring a consistent texture before moving toward higher grit numbers.
Fine grits are used for polishing, producing increasingly glossy finishes as grit numbers rise. This stage transforms a ground surface into a smooth, reflective floor suited to showrooms, retail spaces, and premium residential areas.
Finish type depends on how far the grinding and polishing process progresses. Matte suits honed floors, satin offers a soft sheen, and high-gloss delivers a mirror-like result popular in commercial and feature flooring applications.
Cracked or chipped concrete is a clear sign grinding is needed. Grinding smooths out surface damage, creating an even base that prevents further deterioration and prepares the floor for sealing, polishing, or resurfacing treatments.
If your floor feels uneven underfoot or shows noticeable high and low spots, grinding corrects these irregularities. This creates a level, safe surface, reducing trip hazards and improving the overall functionality of the space.
Leftover paint, epoxy, tiles, or adhesive from previous flooring installations often require grinding for proper removal. This ensures new coatings or finishes bond correctly, preventing peeling, bubbling, or premature failure down the track.
Deep-set stains from oil, chemicals, or age that resist standard cleaning methods often indicate grinding is necessary. Grinding removes the stained surface layer, revealing fresh concrete underneath ready for sealing or polishing.
A tired-looking concrete floor that's lost its shine or appeal can be transformed through grinding and polishing. This process restores a fresh, modern finish without the cost of complete floor replacement or renovation.
If you're planning to polish, seal, or resurface your concrete, grinding is typically the essential first step. It creates the smooth, properly prepared surface required for these treatments to adhere and perform effectively.
Ask about their track record with projects similar to yours, whether residential, commercial, or industrial. Experience with comparable floor sizes and conditions indicates they understand the specific challenges your project might present.
Understanding their equipment quality matters, as professional-grade diamond grinding tools produce more consistent, efficient results. Ask whether they use industry-standard machinery suited to the scale and type of your specific flooring project.
Reputable contractors should readily share references or before-and-after photos from previous jobs. This gives you confidence in their workmanship quality and helps set realistic expectations for your own project's potential outcome.
Clarify whether the quote covers surface preparation, crack repair, multiple grinding passes, sealing, or cleanup. Understanding inclusions upfront prevents unexpected costs and ensures you're comparing quotes accurately across different contractors.
Timeframes vary based on floor size, condition, and desired finish. Ask for a realistic completion estimate, including any potential delays, so you can plan around the project with minimal disruption to your routine.
Confirming licensing and insurance protects you from liability if accidents or damage occur during the project. Reputable contractors should provide this information readily and carry appropriate coverage for residential and commercial grinding work.
The details that matter
Many Perth homeowners use "grinding" and "polishing" interchangeably, but they're actually two distinct stages of the same overall process. Grinding is the preparation phase, using diamond tools to level surfaces, remove old coatings, and smooth out imperfections. Polishing follows, using progressively finer diamond pads to refine the ground surface into a smooth, glossy finish.
Essentially, grinding sets the foundation while polishing delivers the final aesthetic. Understanding this distinction helps you communicate clearly with contractors and set realistic expectations for your floor's finished appearance and overall cost.
Explore concrete finishesThe details that matter
A premium floor grinding service goes beyond simply operating equipment—it reflects genuine expertise, attention to detail, and consistent quality across every project. Look for contractors who assess your specific floor conditions before recommending an approach, rather than applying a one-size-fits-all method.
Premium providers also prioritise proper dust control, safety practices, and tidy site management. Choosing a service with these qualities ensures your floor receives professional treatment, delivering long-lasting results worth the investment.
The details that matter
Reliability in concrete floor grinding comes down to three core factors: the equipment used, the team's experience, and proper industry certifications. Professional-grade diamond grinding machinery ensures consistent, efficient results, while outdated or inadequate tools often lead to uneven finishes and longer project timelines.
Experience matters just as much, as seasoned technicians understand how to handle unexpected surface issues. Combined with proper certifications, these factors indicate a company capable of delivering safe, professional, long-lasting results.
Transforming a rough concrete slab into a glossy, polished floor involves a carefully staged process. It begins with coarse diamond grinding to remove imperfections, old coatings, and unevenness, creating a level surface ready for refinement.
Each subsequent stage uses progressively finer diamond tools, gradually building toward the desired sheen level. Densifying agents strengthen the concrete along the way, while final sealing protects the finished surface, ensuring Perth's glossy polished floors remain durable and easy to maintain long-term.
Grinding a concrete slab is a methodical process requiring the right equipment and technique to achieve a smooth, level surface. It begins with a thorough inspection, identifying cracks, unevenness, and existing coatings that need addressing before grinding begins.
Coarse diamond grinding tools then remove surface imperfections, followed by progressively finer grits to refine the texture. Throughout the process, dust extraction systems keep the workspace clean, while a final inspection confirms the slab meets the required standard before moving to sealing or polishing.
The details that matter
Concrete floor grinding costs in Perth vary based on several factors, making it important to understand what influences pricing before requesting quotes. Floor size is the most obvious factor, but surface condition, existing coatings, and desired finish level all significantly impact the final cost.
Commercial and industrial projects typically cost more due to scale and complexity. Getting multiple detailed quotes helps homeowners and businesses budget accurately while ensuring they understand exactly what's included in each contractor's pricing.
Explore concrete finishesPlanning the work
Agree who accepts the prepared substrate and how soon the next system will be installed. Unplanned storage or trade contamination can compromise a surface that was ready at handover.
Ask for the included area and preparation to be described clearly, together with repair allowances and edge details. Discuss how unexpected findings will be reviewed before additional work proceeds. An agreed scope gives you a useful basis for comparing proposals and organising the space around the work.
Discuss your projectA little more clarity
Good decisions start with a clear understanding of your floor.
Grinding concrete can release hazardous silica dust. Work needs a suitable control plan, isolation and appropriate extraction or wet methods, selected for the task.
Removal depends on adhesive type and substrate condition. Identify potentially hazardous material before disturbing it and agree the required end surface.
Not necessarily. Available removal depth and existing slab geometry limit correction; significant level differences may need another approach.
Not necessarily. Grinding may only prepare the substrate for a coating, overlay or other floor covering.
Edge equipment may be needed where larger machines cannot reach. Clarify skirting, corners and the expected edge finish in the scope.
The agreed surface profile, preparation record and any identified substrate concerns help the next trade assess readiness.
The concrete beneath carpet or tiles can be a starting point, but uncovering it is an investigation rather than a guarantee of a particular finish.
Read guide
The right point in a renovation is a coordinated decision. Protect access for preparation while preventing later trades from damaging the completed floor.
Read guide
A short quote can leave important decisions unresolved. Compare the actual preparation, system and handover expectations before choosing a contractor.
Read guide