House and Extension Slabs
Slabs for new builds and extensions, set out and poured to the engineering requirements for your site, with reinforcement and thickness matched to the loads the slab will carry.
It starts with the ground
Perth Concrete Slabs
Concrete slabs in Perth: house slabs, shed and garage pads, extensions and outdoor areas, from site preparation and formwork through to pour and finish.
Natural characterConsidered finishesEveryday spaces
Residential / Commercial / Industrial Discover your floor
Start with your space
Concrete Slabs Perth
A concrete slab is only as good as what sits under it. Base preparation, compaction and drainage decide whether a slab performs for decades or starts moving within a few years, which is why the groundwork matters more than the pour itself.
Perth soils vary considerably across the metropolitan area, from sand to reactive clay, and the slab design has to respond to what is actually on your block. Reinforcement, thickness and footing detail all follow from that.
Slabs are poured for houses, extensions, sheds, garages, patios and outdoor areas, each with different loading and finish requirements. The intended surface finish should be agreed before the pour, since some finishes are created during it rather than afterwards.
An approximate area is fine. The right system starts with an assessment.
Perth Concrete Slab Services
Shed and Garage Pads
Pads sized and reinforced for vehicles, workshop equipment and storage loads, with falls set so water drains away from the building rather than pooling against it.
Site Preparation and Base Work
Excavation, levelling and compaction of the base before any formwork goes in, since inadequate compaction is behind most slabs that settle or crack later.
Formwork and Reinforcement
Setting out the slab shape and installing mesh or bar to the required spacing and cover, so the reinforcement sits where the design intends rather than wherever it lands.
Pour and Finish
Placing and finishing the slab to the agreed surface, whether a broom finish, a smooth trowel finish or a slab prepared for later polishing or covering.
Drainage and Falls
Setting falls and drainage so water moves off the slab and away from the structure, which matters particularly for outdoor slabs and anything against a building.
Concrete slabs
Factors Affecting Concrete Slab Price in Perth
Concrete slab pricing in Perth turns heavily on the ground and the access. Slab area and thickness set a baseline, but site conditions change the figure substantially: a level sandy block needs far less preparation than a sloping site or reactive clay requiring deeper footings and more excavation. Reinforcement follows the engineering, and a slab designed for vehicles or machinery costs more than a simple patio pad. Access affects whether concrete can be discharged directly or needs pumping, which is a separate cost. Removal and disposal of an existing slab, formwork complexity on irregular shapes, drainage requirements and the specified surface finish all add. Engineering and any required inspections are usually separate again.
Explore concrete finishesBenefits of a Properly Built Concrete Slab
Long Service Life
A well-designed and properly compacted slab lasts decades with little attention, which is why the money spent on base preparation returns more than money spent on the pour.
Stable Foundation
Correct reinforcement and thickness keep the slab working as one piece, resisting the differential movement that causes cracking and uneven floors.
Ready for Any Finish
A slab poured with a later finish in mind can be polished, coated or covered without remedial work, provided the intent is agreed before the pour.
Handles Heavy Loads
Designed to the intended use, a slab carries vehicles, machinery and storage without the deflection that lighter construction would show.
Controlled Drainage
Falls set during the pour direct water where it should go, protecting the building and preventing the pooling that shortens a slab’s life.
Low Maintenance
Aside from joint attention and occasional sealing depending on use, a sound slab asks very little over its working life.
The details that matter
Why Choose Our Concrete Slab Contractors in Perth
What goes wrong with slabs is almost always underneath them. Our Perth team treats excavation and compaction as the part of the job that determines the outcome, not the part to rush before the interesting work starts. We assess what is actually on your block rather than assuming, because Perth ground varies enough that a slab detail suited to one suburb can be wrong in the next. We ask what the finished floor is meant to be before we pour, since a slab intended for polishing is treated differently from one that will be covered. Quotes set out the preparation, the reinforcement, the finish and whether pumping, existing slab removal and drainage are included.
The details that matter
Concrete Slab Cost in Perth
Concrete slabs in Perth are quoted per square metre, though the rate varies widely with thickness, reinforcement and, above all, how much preparation the site needs before anything can be formed up.
Compare quotes on what they include below the surface, not just the rate. Check whether excavation, compaction, fill, reinforcement, pumping, formwork and existing slab removal are in the price, since these are where quotes diverge. Ask what the quote assumes about ground conditions and what happens if the site proves different once excavation starts. A site-specific quote is the only reliable basis for budgeting.
Discuss your projectA little more clarity
Frequently Asked Questions
Good decisions start with a clear understanding of your floor.
How thick should a concrete slab be?
That depends on what it carries and the ground beneath it. A patio pad and a slab taking vehicles or machinery have quite different requirements, and the engineering should determine it rather than a rule of thumb.
How long before a new slab can be built on?
Concrete gains strength over time and the usable point depends on the mix, the loads and the weather. Your contractor should confirm the timing for your specific pour.
Do concrete slabs crack?
Fine shrinkage cracking is normal and largely managed with control joints and reinforcement. Structural cracking usually points to inadequate base preparation or unaccounted ground movement.
Can I polish a new slab later?
Often yes, but it is far easier if the intent is known before the pour, since the mix, the finish and the flatness all affect what is achievable when polishing.
Do I need an engineer?
For structural slabs, generally yes, and often for approval as well. Your contractor can tell you whether your project requires engineering and inspections.
What preparation does the site need?
Typically excavation to level, removal of unsuitable material, imported fill where needed and compaction. What is required is established by looking at the site rather than assumed.
Perth Polished Concrete Flooring Resources
All services ↗
How to compare concrete flooring quotes
A short quote can leave important decisions unresolved. Compare the actual preparation, system and handover expectations before choosing a contractor.
Read guide
What shapes the cost of polished concrete?
A useful budget starts with a defined scope, not an unexplained square-metre rate. Here is what to compare when planning a Perth floor.
Read guide
Polished concrete vs grind and seal
Similar-looking floors can have very different wearing surfaces. Understand where the appearance comes from before comparing price and maintenance.
Read guide